If the fuel filter isn’t listed as a maintenance item, it might be that the filter is integrated with the fuel pump inside or on the fuel tank. To replace it, you have to replace the whole setup. The filter is supposed to catch and remove any contaminants and impurities from the fuel line that could damage the engine.
What happens if you don’t replace fuel filter?
Not changing the fuel filter regularly can lead to engine performance issues, and check engine error lights showing up on the dash. … If this happens it can lead to serious and costly engine damage. Fuel injectors can become clogged very easily, and this will cause significant damage to an engine.
Do I really need to replace my fuel filter?
Most manufacturers recommend changing your fuel filter between every 20,000 and 150,000 miles. The older the vehicle, the more frequent your filter changes should be. This is because after around seven years of driving, rust, dirt and debris build up faster, clogging the filter.
How do I know if my fuel filter needs changing?
5 Signs that You Need to Replace Your Fuel Filter
- Car Has Difficulty Starting. This could be a sign that your filter is partially clogged and on its way to being completely dammed up.
- Car Won’t Start. …
- Shaky Idling. …
- Struggle at Low Speeds. …
- Car Dies While Driving.
What are the signs of a bad fuel filter?
What Are the Signs of a Clogged Fuel Filter?
- Poor Engine Performance. Under heavy or high-speed acceleration, a clogged fuel filter may cause the engine to randomly hesitate, surge or sputter. …
- Hard Starting. …
- Stalling. …
- Random Misfire or Rough Idle. …
- Fuel System Part Failures. …
- Check Engine Light (CEL)
How much does it cost to change fuel filter?
Most fuel filters can be replaced within an hour so plan on around $60 to $120 in labor. Some in-tank filters or those that are part of the fuel pump assembly may require additional labor time. On average, the total cost of fuel filter replacement will be around $70 to $160 which includes parts and labor.
Can you drive with a bad fuel filter?
Stalling – A vehicle with a dirty or blocked fuel filter is one of the main reasons in what causes an engine to stall while driving. A blocked fuel filter prevents fuel from traveling through the fuel lines to the engine, starving your engine of fuel. If your engine is not getting fuel, it simply will not run.
How often should fuel filters be replaced?
Depending on the age of your vehicle, it may require the fuel filter be changed every 20,000-30,000 miles, which, given the average 13,000 miles per year that Americans drive, is about once every year and a half to two years. However, newer vehicles can have fuel filters that last up to 60,000 miles.
How long do fuel filters last?
The fuel filter keeps debris from making their way to the engine and collects them all in one place. Generally, it’s a good idea to replace your fuel filter every two years or 30,000 miles.
Can you clean a fuel filter instead of replacing it?
If your filter is nylon or paper, you should just replace it with a new one. If it’s made of metal and isn’t too grimy, you can clean and reuse it. Before you start, relieve your fuel system’s pressure and disconnect your battery. Remove the filter from the fuel lines, then spray it with a solvent cleaner.
Will a bad fuel filter throw a code?
check engine light comes on: while the fuel filter is not directly connected to the engine computer, a blocked fuel filter can trigger a variety of trouble codes, including: low fuel pressure. lean running condition. oxygen sensor fault.
What problems can a bad fuel filter cause?
A clogged fuel filter causes low fuel pressure that results in a lean fuel condition and engine misfire. This can result in poor fuel mileage, rough idling and possibly cause the check engine light to come on. Once that light is on, it’s time for a trip to the repair shop.
How do I check my fuel filter?
If the fuel pressure is lower than it should be or if it fluctuates, one of the causes could be clogged filter. If you remove the fuel filter you can check it for blockages by blowing air through it. To do this carefully attach a hose to one end of the air filter and then slowly blow through it.