How do I reset my GE Cafe water filter?
The “Water Filter: Replace” status message can be reset by entering the Settings menu from the home screen. Then, select the Water Filter menu and press the RESET button. This will reset the filter status.
General Electric (GE) refrigerators do not have a dedicated reset button, but in the event of a technical issue, you can reset your refrigerator.
How do you reset a GE Cafe Refrigerator?
Try resetting the control panel by turning off power to the refrigerator briefly. Unplug the refrigerator or turn it off at the circuit breaker for 30 seconds to reset the control.
How do you turn off the filter light on a GE refrigerator?
After you change the filter, you must press and hold the RESET WATER FILTER pad until the red light goes off. The light will either disappear or turn green.
How do I put my GE refrigerator in diagnostic mode?
Simultaneously press and hold all 4 temperature adjustment buttons for approximately 3 seconds. A flashing 0 in the refrigerator and freezer displays will indicate that the refrigerator is in Self Diagnostic mode. Use the freezer temperature adjustment buttons to enter the test code number in the freezer display.
Why is my GE refrigerator not dispensing water or ice?
On refrigerators with a water filter, a clogged water filter can prevent water from entering the icemaker and dispenser. … To determine if the filter is clogged, remove the filter and replace with the bypass plug that was provided with the unit. If water is dispensed, the water filter is the issue.
How do you unlock a GE Cafe refrigerator?
Refrigerator Lock Feature
Locate the lock button and hold it in for three seconds. This should remove the control lock feature.
Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.
Press and hold the “WATER FILTER” button for 3 seconds. When the system is reset, the water filter icon will return to its BLUE color and the words “Replace Filter” will disappear from the display.
How do I reset the water filter light on my Amana refrigerator?
To reset the filter indicator light, press and hold both the DISPENSER LOCK and AUTO LIGHT buttons simultaneously for 4 deliberate seconds. The green indicator light will flash 3 times when the reset has successfully occurred.
Why is my water filter light on?
There is a very slim chance of a water filter being defective. Instead, the most common reasons are that the change light needs to be reset. Typically, this light is a timer meant to remind you to change your filter every 3 to 6 months.