Will a high MERV filter damage my furnace?

Is MERV 13 too high for furnace?

MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units. If you are wondering what MERV to try, keep these recommendations in mind; ASHRAE recommends MERV 6 or higher.

Can I use a higher MERV rating restrict airflow?

Using an air filter with a MERV rating that’s too high is just as bad as using one that’s too low. Air filters with higher MERV ratings can filter more, but the thickness of the filter material can restrict airflow.

Is MERV 12 too high for HVAC?

9-12 MERV – These filters are more efficient and usually offer the best indoor air quality improvement for residential applications. Deep pleated filters fall into this category. Because they work so well at removing airborne pollutants, they must be regularly checked to ensure proper airflow.

What MERV rating can my HVAC handle?

In general, filters with a rating of MERV 16 or below are considered to be HVAC-system-grade filters for residential, commercial and general hospital use. MERV 17 through MERV 20 filters are typically used in surgical operating rooms, clean rooms and other contexts that require absolute cleanliness.

IT IS AMAZING:  Do performance air filters actually work?

Do I really need MERV 13?

In most households, a MERV 11 filter provides enough purification to keep the home healthy. However, if someone in your home suffers from allergies, you probably want to go with a MERV 13. This can be pet allergies, pollen allergies, or even allergies to mold and dust.

Is higher MERV better?

The higher the MERV rating, the more efficient the air filter is at catching harmful pollutants in your home’s air. … MERV 5–8 (good): These filters are better at catching small particles (3–10 microns) like mold spores, hair spray, dust mites and animal dander. MERV 9–12 (better): The best option for residential use.

Is MERV 8 good enough for Covid?

Filters with MERV-13 or higher ratings can trap smaller particles, including viruses. Many home HVAC systems will have a MERV-8 filter installed as the default. … By itself, using an upgraded HVAC filter is not enough to protect people from COVID-19.

Will a MERV 8 filter hurt my furnace?

The short answer is that it can, but it’s not really an issue except under extreme circumstances. Most modern HVAC systems have no problem working with higher MERV filters, which is why millions of homeowners depend on them.

What happens if your furnace filter is too big?

If you purchase a filter that’s too large, it won’t slide into the slot correctly. If the filter is too small, it won’t cover the entire space and may allow dust and dirt to flow past.

Can my furnace handle a MERV 12 filter?

MERV is short for “Minimum Efficiency Reporting Value”. … A higher MERV rating means a higher resistance, which means less airflow. When researching HVAC systems, airflow will come up a lot. That’s because it’s very important for the performance and longevity of your furnace or your air handler.

IT IS AMAZING:  Is filtering your water bad?

What MERV rating is best for home use?

According to the ASHRAE, the best rating for residential HVAC systems is MERV 13. But before you upgrade your filter, make sure your specific system can accommodate that rating. A higher MERV rating often means lower airflow, which can cause the system to work harder—use more energy—to do its job.

Can I use MERV 12 in my house?

A filter with a MERV rating of around 10 to 12 is sufficient to remove most allergy-causing particles from your home’s air. Most air filters that are able to remove common allergens will have the word “allergy” or “allergen” on their packaging.