How thick should my air filter be?

Can an air filter be too thick?

If you get a filter with pleats that are too thick, your filter could get dirty quickly. Thus, making your AC unit work harder than it needs to. A good benchmark to follow when considering MERV ratings is that if it’s more than 13, the pleats are most likely too thick for your filter.

Does thickness of air filter matter?

Most air filters are 1 inch thick, but some systems can accommodate filters 2 to 5 inches thick. In our tests, we found that the thicker the filter, the better it works and the longer the replacement intervals. That means it’s better for you and for your heating, ventilating, and air conditioning (HVAC) system.

Is a 5 inch air filters better than 1 inch?

Enhance Indoor Air Quality

Replacing your standard one-inch air filter with a pleated 5-inch filter can result in better air quality inside your home. That’s because bigger air filters feature higher MERV ratings, leading to better filtration of pollutants and allergens.

Is it better to use a thicker furnace filter?

The Thicker, the Better

Furnace filters can range anywhere from 1″to 5″ in thickness. In general, the thicker the furnace filter is the more efficiently your unit work and the longer it will last.

IT IS AMAZING:  Is ozone in air purifiers safe?

Can I stack two 1-inch air filters?

Bottom Line: Putting two filters will not make it last longer but may make you have to replace it earlier, assuming it doesn’t already reduce air flow too much with just the filters.

Is MERV 13 bad for HVAC?

Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.

Are MERV 11 filters bad for HVAC?

A MERV 11 air filter has a higher efficiency rating. … In particular, using an air filter with a MERV rating that’s too high can damage the compressor, heat exchanger, and air conditioner coil. In most cases, a MERV 11 air filter isn’t too high for residential use.

What MERV level should I use?

We do recommend that everyone uses filters that have at least an 8 MERV rating. These filters will remove the majority of pollutants from your indoor air. If you have serious medical conditions making it difficult to breathe, you might want to get a filter with MERV 9-12 rating.

Can I use a 4 inch filter instead of 5?

Going down in thickness by an inch shouldn’t be a big deal – for example, you should be able to use a 4-inch filter instead of a 5-inch filter. … Higher MERV ratings work best when the filter is 4” thick or thicker because they trap extremely small particles, which means contaminants will build up quickly on the screen.

Can you stack 1 inch air filters?

In some cases, your intake vents or air handler vents have a filter depth greater than an inch. Because 1 inch air filters are the most common, some homeowners may think it’s okay to layer 1 inch air filters to fit a 2-, 3-, or 4-inch air filter slot. It’s not recommended to do this.

IT IS AMAZING:  Why are Berkey filters out of stock?

Can I use a 2 inch filter instead of 4?

For the same length and width, you can get 1 inch, 2 inches, 4 inches and even thicker. And all of them will fit your furnace. … For instance, we’ve put a 4 Inch vs 1 Inch furnace filters comparison.