How do I reset my GE water filter light?
The “Water Filter: Replace” status message can be reset by entering the Settings menu from the home screen. Then, select the Water Filter menu and press the RESET button. This will reset the filter status.
How do you reset a GE refrigerator water dispenser?
Press and hold the dispensers lock and auto light buttons at the same time until the filter status indicator starts to flash.
How do I turn off the water filter light on my GE refrigerator?
After you change the filter, you must press and hold the RESET WATER FILTER pad until the red light goes off. The light will either disappear or turn green.
Press and hold the “WATER FILTER” button for 3 seconds. When the system is reset, the water filter icon will return to its BLUE color and the words “Replace Filter” will disappear from the display.
Why won’t my GE fridge dispense water after replacing filter?
If your GE refrigerator won’t dispense water after the filter has been replaced, it could be that the water supply tube in the door is frozen. … If air is not able to pass through the tube, it is frozen and will need to be thawed out, which can be done by simply leaving it at room temperature for about an hour.
How do I reset my GE French door refrigerator?
Try resetting the control panel by turning off power to the refrigerator briefly. Unplug the refrigerator or turn it off at the circuit breaker for 30 seconds to reset the control.
Why is my water filter light on?
Often times a customer wants to know if the filter is defective. There is a very slim chance of a water filter being defective. Instead, the most common reasons are that the change light needs to be reset. Typically, this light is a timer meant to remind you to change your filter every 3 to 6 months.