Can I use a thicker filter in my furnace?

Do thicker furnace filters restrict airflow?

Because high MERV filters are designed to catch large and small particles and therefore will get dirty quickly. And since the filter is thin, the filter will quickly fill up with particles and block airflow. … A thicker filter (4-5 inches) has more surface area and therefore allows more room for air to pass through.

Can an air filter be too thick?

If you get a filter with pleats that are too thick, your filter could get dirty quickly. Thus, making your AC unit work harder than it needs to. A good benchmark to follow when considering MERV ratings is that if it’s more than 13, the pleats are most likely too thick for your filter.

Does thickness of furnace filter matter?

The Thicker, the Better

Furnace filters can range anywhere from 1″to 5″ in thickness. In general, the thicker the furnace filter is the more efficiently your unit work and the longer it will last.

Is MERV 13 too high for residential?

One factor to consider is air flow through the system. … In some cases, using an air filter that is too restrictive for your system may cause low air flow problems as well. MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units.

IT IS AMAZING:  Do carbon water filters have a shelf life?

Can a furnace filter be too restrictive?

All furnace filters have a MERV rating which indicates filter efficiency. … The makeup of these high-efficiency filters can be too restrictive for the unit, creating a barrier to good airflow. The HVAC system may struggle to pass air through the air filter and expend more energy in its attempts.

What happens if your furnace filter is too big?

If you purchase a filter that’s too large, it won’t slide into the slot correctly. If the filter is too small, it won’t cover the entire space and may allow dust and dirt to flow past.

Can I use a 2-inch filter instead of 1?

The general best practice is to use the thickest air filter you can for maximum efficiency. … If your system only fits a 1-inch or 2-inch filter, a high MERV rating could be detrimental. A 1-inch filter with less surface space will get clogged fairly quickly and need to be replaced much sooner than a thicker filter.

How many filters should a furnace have?

Most furnaces will have a V shape filter system; the system will take 2 filters. The filters go up into the plenum in a V shape. Make sure that when you re-install the top door, it goes over the furnace frame so it engages the safety switch. If not the furnace will not run.

Can I use a 4 inch filter instead of 1?

While a 4-inch-thick filter is more efficient than a 1-inch filter, the right size depends on your furnace. If you measure the filter slot, and it’s large enough to accommodate the thicker filter, then you can use it. However, if the slot is less than 4 inches wide, you’re stuck with using that thickness.

IT IS AMAZING:  Who make AC Delco Oil Filters?